Bluetooth is one of the most effective ways of connecting multiple hardware devices to your computer wirelessly. Knowing how to manage Bluetooth devices is vital as more wireless gadgets are gaining recognition among users.
Bluetoothctl is an interactive and easy-to-use tool for controlling Bluetooth devices. It is the main utility for managing Bluetooth on Linux-based operating systems. This guide will show you how to easily set up Bluetooth devices and connections on your Linux PC using bluetoothctl.
Checking Bluetooth Status
Before you can add Bluetooth devices, the Bluetooth service on your computer must be up and running. You can check it with the help of the systemctl command.
sudo systemctl status bluetooth
If the Bluetooth service status is not active you will have to enable it first. Then start the service so it launches automatically whenever you boot your computer.
sudo systemctl enable bluetooth
sudo systemctl start bluetoothIf you do not have built-in Bluetooth on your PC, you can easily add Bluetooth using external Bluetooth adapters.
Scanning for Nearby Devices
To actively search for Bluetooth devices that you can connect to, use the scan command as follows:
bluetoothctl scan onWhen you run the command above, your PC will look for and list all the Bluetooth devices that are within the reach of your system.
All Bluetooth devices are labeled as Device followed by their respective Media Access Control (MAC) addresses, a unique identifier for a device on a network. The MAC address follows the format XX : XX : XX : XX : XX : XX. Bluetoothctl also displays the name of the device, for example, ruwido BLE in the output above.
Note: If you can't find the Bluetooth device you are looking for, make sure that your system Bluetooth is discoverable.
To make your Bluetooth adapter discoverable to other devices, use the following command:
bluetoothctl discoverable on
Connecting to Your Device
Now that you have a list of Bluetooth devices you can connect to, use the MAC address to connect to a particular device.
The simplest way to connect with a Bluetooth device is to pair it with your PC using the pair command.
bluetoothctl pair FC:69:47:7C:9D:A3Note: Remember to replace the MAC address FC:69:47:7C:9D:A3 used in this guide with the respective MAC address of your device.
If the device you are connecting to has a GUI interface, for example, a smartphone, the device will display a prompt asking you to accept the connection. The system will also ask you to confirm the pairing on your PC. You can do so by typing yes in the command line.
For devices that are already paired with your PC, you can simply connect to them in the future using the connect command as follows:
bluetoothctl connect FC:69:47:7C:9D:A3Listing Paired Devices With bluetoothctl
You can look at the devices that are currently paired with your system by running the following command:
bluetoothctl paired-devicesYou can also list devices that are within the Bluetooth range of your computer using the command below:
bluetoothctl devicesTrusting Paired Devices
In addition to pairing with a Bluetooth device, you can also choose to trust certain devices so that you easily connect to them in the future.
To trust a Bluetooth device:
bluetoothctl trust FC:69:47:7C:9D:A3You can untrust a device by issuing the following command:
bluetoothctl untrust FC:69:47:7C:9D:A3Disconnecting Bluetooth Devices
To unpair a Bluetooth device, use the remove command as follows:
bluetoothctl remove FC:69:47:7C:9D:A3You can also disconnect a device from your system using bluetoothctl:
bluetoothctl disconnect FC:69:47:7C:9D:A3If you wish to block a specific device from connecting to your system, you can use the block command followed by the MAC address of the device.
bluetoothctl block FC:69:47:7C:9D:A3To unblock a device, simply replace the word block in the aforementioned command with unblock.
Using the Interactive Mode
As mentioned earlier, bluetoothctl is an interactive utility. In this guide, we used long commands to avoid confusion but normally you should use the interactive mode because it is faster and easier to work with.
To enter the interactive mode, simply run the bluetoothctl command without arguments as follows:
bluetoothctlAfter you've switched to the interactive mode, you can issue the commands without prepending bluetoothctl as shown below.
To exit the bluetoothctl interactive mode, simply type exit in the prompt.
Connecting With Other Devices Wirelessly on Linux
This guide has shown you how to manage Bluetooth devices on your Linux PC using bluetoothctl. Bluetoothctl is a command-line utility in Linux that allows you to connect and pair with Bluetooth devices efficiently.
As with most network technologies, hackers can exploit Bluetooth as well. In order to stay safe, you should always ensure that your Bluetooth network is properly configured and secure.
){kind=link}